Cobalt Bimini Top

Find the right bimini top for your Cobalt by selecting installation height, beam width, and the coverage location you need. Every top arrives ready to install with hardware.

Sizing Your Cobalt Bimini Top

Choosing the right bimini top starts with three measurements: installation height, beam width, and the location where you want coverage. Installation height determines how much headroom you'll have when seated. Measure from the mounting location on your boat to where you want the top of the canopy. Beam width is the widest point of your Cobalt's hull. These two measurements guide you to a top that fits your boat and your preferred coverage area.

Installation Height and Clearance

Bimini installation height affects both comfort and function. Measure from your deck to the height you want the canopy frame when the top is up. Account for where you sit and how much clearance you need to move around the boat. A top that's too low forces you to duck. A top that's too high catches wind and puts stress on the frame, much like improperly fitted boat covers for Cobalt models can create unnecessary wear.

Coverage Location Options

Decide where you want shade on your Cobalt. Forward coverage protects the helm and front seating. Rear coverage shades passengers in the back. Full coverage runs bow to stern. The location you choose determines the frame length and mounting hardware you'll need. Every top ships with the mounting hardware required for installation.

What's Included With Your Bimini Top

Every Cobalt bimini top from Westland arrives ready with hardware and assembly instructions. The frame, canopy, and mounting components ship together, just like our mooring covers for Cobalt boats. You don't need to source brackets, straps, or fasteners separately. Our marine canvas experts build each top to the height and beam width you select, so it fits your boat the first time.

Frame and Canopy Construction

The frame is built to support the canopy and hold up to wind and weather. The canopy fabric is sewn to resist UV damage and repel water. Reinforced stitching at stress points prevents tearing where the fabric attaches to the frame. Every seam is double-stitched for durability.

Mounting Hardware

Your top ships with the mounting hardware needed for installation. Hardware may not match components already on your boat. Follow the included instructions to attach the frame to your Cobalt's deck or gunwale. The mounting system is designed to hold the top securely when it's up and fold cleanly when it's down.

Westland's Fit Guarantee

Westland has built boat covers and bimini tops for nearly 40 years. We're the same team trusted by today's top boat manufacturers. When you select a bimini top by installation height, beam width, and coverage location, you're working with in-house marine canvas experts who know how these tops fit real boats. Every top is guaranteed to fit your Cobalt when sized correctly.

Trusted by Boat Manufacturers

Westland supplies marine canvas directly to boat manufacturers. The same craftsmanship that goes into OEM covers and tops goes into every bimini top we sell directly to you. We've spent decades working with Cobalt hulls and deck layouts. That experience shows in how our tops fit and perform on the water.

Measure your Cobalt's beam width and decide on installation height and coverage location. Select your top and get it shipped with everything you need to install it. Find your guaranteed fit Cobalt bimini top now.